How to sell a used MRI with escrow.
An MRI is the hardest system in the building to sell safely: it is heavy, full of helium, and worth too much to release on a promise. This is the order to do things in so you are paid in full before the magnet leaves.
Short version. Document the field strength, software, coils, gradients and helium level. Keep the magnet cold and plan a controlled ramp-down, never a quench. Agree who pays for rigging and how long the buyer has to inspect, have the buyer fund escrow, wipe patient data, then release the system. Funds move after inspection.
What determines what a used MRI is worth?
Block Imaging lists the questions a buyer asks first: make, model and year; magnet type; gradients; and system software level. (Block Imaging)
- Field strength and magnet type. The magnet sets the buyer pool, so state it plainly on the listing.
- Software level. Block says the operating software version “is what a buyer really needs to value your MRI.” Screenshot the console and the enabled options list, including packages such as cardiac, neuro perfusion, prostate or breast.
- Gradients. Slew rate is “the most important stat they’ll need to see,” and it is in the scanner manual. (Block Imaging)
- Coils. A full list with channel counts (for example 16-channel, neurovascular). Block notes coils “can swing the value of your MRI.”
- Helium level. A 1.5T magnet holds about 1,500 to 2,000 liters of liquid helium. (Okon Recycling) Block reports end users paying $30 to $50 per liter or more, with extra fees for emergency fills or fills of 250 liters or less, and waits of 1 to 4 weeks. (Block Imaging) Illustration: a 500-liter top-up at those prices is $15,000 to $25,000, which a buyer will subtract if the level is low.
- Service history. Records of cold head, compressor and helium fills. Block notes most MRI service contracts will not cover a quench caused by negligence, so a clean record matters.
Should you ramp down or quench an MRI you are selling?
A ramp-down is a controlled shutoff: a magnet power supply removes the current until the field reaches zero. Technicians reduce the current “over several hours or days.” Block puts the power supply fee at $6,000 to $12,000. (Block Imaging)
A quench is a loss of superconductivity that boils the helium into gas and vents it through the quench pipe. Block calls the helium loss “a serious (five-figure!) expense” with possible damage to the magnet. (Block Imaging) Refilling a quenched 1.5T magnet can cost upwards of $30,000 to $40,000, according to Okon Recycling.
Block notes engineers sometimes quench decommissioned magnets on purpose to save the time and cost of a formal ramp-down. That can make sense for scrap. For a resale, the buyer pays for the refill one way or another, so agree the shutdown method in the purchase terms.
How much do MRI de-installation and rigging cost?
Block Imaging puts the full cost of relocating an MRI at $60,000 to $100,000, with transport cost driven by distance. Depending on helium level, a refill may also be needed to keep the magnet cold in transit.
The rigging path is the variable sellers control. Block advises documenting the magnet’s egress route, including hallways, corners and anything that could block trucking, because “some creative rigging may be necessary.” If a wall, window or roof hatch has to be opened, decide who pays for that and for restoring it before the buyer funds escrow.
How does escrow protect the seller of an MRI?
Using Escrow.com’s published process as the example of how licensed escrow works in a brokered deal: (Escrow.com)
- Funds first. The buyer wires payment to the escrow provider, which verifies it and notifies the seller. Only then does the equipment ship.
- Inspection window. The parties set an inspection period of 1 to 30 calendar days when the transaction opens. (Escrow.com) It starts on confirmed receipt, and a buyer who neither accepts nor rejects is treated as having accepted. (Escrow.com instructions)
- Rejection. A rejected item must be returned within 10 days, and the seller then has 5 days to inspect the return. If the deal is cancelled, the buyer bears 100% of the escrow fee.
- Fees. The buyer, the seller, or both at 50% each can pay the escrow fee. (Escrow.com) Amounts are disclosed on the provider’s fee calculator and may change. (Escrow.com terms) Domestic wires carry no extra escrow charge; wires from a foreign bank add $25. (Escrow.com)
For an MRI, write down what “inspection” means. A magnet that arrives at field zero cannot be imaged until it is installed and ramped up, so agree whether the buyer is inspecting physical condition and documentation against the listing, and set the window to fit.
What about patient data on the MRI console?
HHS says a covered entity may reuse or dispose of electronic media holding ePHI only after the ePHI is removed, by clearing (overwriting), purging (degaussing) or destroying the media, and refers to NIST SP 800-88 for sanitization guidance. (HHS) Marketplace terms say the same: DOTmed’s seller terms require sellers to permanently remove patient data before transferring equipment. (DOTmed) Wipe the console and any attached workstations, and keep the certificate.
What documents will an MRI buyer ask for?
- Photos of the factory tags showing date of manufacture, make, model and serial number
- A written spec sheet, plus photos of the magnet, table, console and workstations
- Console screenshots of the software level and enabled options
- Coil list with channel counts, and the gradient slew rate
- Current helium level and recent service and fill records
- Phantoms, manuals and software disks, photographed
- The egress path, with door, corridor and elevator measurements
- Proof of ownership, and a lien release if the system was financed
How do you sell a used MRI with escrow, step by step?
- Gather the data above before talking price. Buyers discount what they cannot see.
- Get a value range based on field strength, software, gradients, coils and helium, not age alone.
- Verify the buyer: business identity, funds and insurance, before any site visit.
- Agree terms in writing: price, shutdown method (ramp-down), who pays de-installation and building work, removal dates, inspection scope and window, and who pays the escrow fee.
- Buyer funds escrow. Do not schedule engineers until the provider confirms funds.
- Wipe patient data from the console and workstations and file the certificate.
- Ramp down and de-install. Schedule the ramp-down, then rigging and transport with insured crews.
- Buyer receives and inspects within the agreed window.
- Escrow releases funds to you on acceptance, or automatically when the window ends without a rejection.
Selling a CT as well? The channel math is different: see auction vs broker vs trade-in for a used CT scanner. If the whole facility is closing, start with the hospital closure equipment timeline.
How TradePark handles this
TradePark runs this process for you. It verifies both businesses, keeps your facility’s identity private, and sends the buyer one quote covering the MRI, freight and TradePark’s service fee. The buyer pays into escrow with a licensed third-party escrow provider before anything is removed. TradePark coordinates de-installation, rigging and freight with licensed, insured carriers, the buyer inspects, and escrow releases the funds. TradePark never takes title, and a service fee applies only on completed transactions. It is not an auction: there is no deadline, so you can list before a closure or insolvency forces the sale. NIST 800-88 data wiping and a recovery report for finance are available as paid add-ons.
List an MRI, browse equipment for sale, or read how a deal works. Buyers can start at buy equipment.
Questions
How does escrow work when selling a used MRI?
The buyer wires the purchase price to a licensed escrow provider before anything is removed. The seller releases the system for removal once funds are confirmed, the buyer receives and inspects it within an agreed window, and the provider then pays the seller. On Escrow.com, the inspection period can be set from 1 to 30 calendar days, and a buyer who takes no action is treated as having accepted.
Who pays the escrow fee on an equipment sale?
It is negotiated. Escrow.com lets the buyer pay 100%, the seller pay 100%, or each pay 50%. If the deal is cancelled or the goods are rejected, the buyer bears the full escrow fee. Fees are published on the provider’s own fee calculator and can change.
Should we ramp down or quench an MRI before selling it?
Ramp it down if you want the full value. A controlled ramp-down reduces the current over several hours or days and keeps the helium. A quench boils the helium off; refilling a 1.5T magnet can cost $30,000 to $40,000, and a buyer will deduct that. Block Imaging puts the ramp-down power supply fee at $6,000 to $12,000.
How much does it cost to de-install and move an MRI?
Block Imaging puts the full cost of relocating an MRI at $60,000 to $100,000, depending largely on distance and the rigging path. Agree who pays for de-installation, rigging and any building work before the buyer funds escrow.
Do we need to wipe patient data from the MRI console?
Yes. HHS says electronic media with protected health information may be reused or disposed of only after the ePHI is removed, by clearing, purging or destroying the media, and points to NIST SP 800-88 for sanitization guidance. Keep the wipe certificate with the sale file.
Sources
- Block Imaging: MRI valuation questions
- Block Imaging: how to sell your used MRI machine
- Block Imaging: MRI helium refill cost (updated February 2026)
- Block Imaging: what is an MRI quench
- Block Imaging: cost to relocate an MRI machine
- Okon Recycling: MRI ramp-down, helium volume and quench costs
- Escrow.com: how broker escrow works
- Escrow.com: inspection period length
- Escrow.com: general escrow instructions
- Escrow.com: who pays escrow fees
- Escrow.com: wire transfer fees
- Escrow.com: terms of use (fee disclosure)
- HHS: reusing or disposing of media that store ePHI
- DOTmed: seller terms (patient data removal)
Selling an MRI? Keep it cold and get paid first.
Send the make, model, field strength, software level and helium reading. We reply within one business day with a value range and a ramp-down and removal plan.