Guide for C-arm sellers

Checklist for selling a used C-arm.

Buyers price a used C-arm on details: detector, software, component dates and service history. This is what to gather, what to photograph, and what paperwork the sale needs before the unit leaves.

Short version. Photograph every serial tag and the software screen. State whether it is a 9″ or 12″ image intensifier or a flat panel, list the software options, and pull the service history. Send buyers boot and test-image photos. Wipe patient data with the manual’s procedure, file your state’s x-ray disposition notice, and release the unit only after the buyer’s funds are confirmed.

What identifies the C-arm: make, model and year?

  • Serial tags. Photograph all of them. Block Imaging lists serial tags, the software level screen, the tube, the image intensifier or detector, and any error codes among the photos a buyer needs. (Block Imaging)
  • Date of manufacture, with context. Block calls system age useful but “not the best indicator,” because software revisions and parts may not match the build date: an OEC 9800 made in 2002 could carry newer software than one made in 2004. (Block Imaging)
  • Component dates. Buyers ask for the manufacture dates of the x-ray tube, image intensifier, CCD camera, collimator and high voltage tank, since a used system may not carry its original parts.

Image intensifier or flat panel: which does it have?

State it in the first line of the listing. Block Imaging compares the two: (Block Imaging)

  • Degradation. Image intensifiers gradually lose gain, so image quality declines. Flat panel detectors show far less degradation over a longer working life.
  • Magnification. Magnifying on an image intensifier narrows the field of view; on a flat panel it does not.
  • Cost and service. A new flat panel detector costs roughly two to three times an image intensifier. Service coverage on a flat panel likely costs 50% to 60% more, and used detectors are scarce, so owners rely more on the OEM for parts.
  • Image intensifier size. On the OEC 9900, the 9″ is often used for cardiac, orthopedic and pain management work, the 12″ for vascular, neurovascular and orthopedic cases, and the Super C (larger arc, more rotation) comes only with the 9″. (Block Imaging)

Which software and options affect value?

Software packages define what the system can do clinically. On the OEC 9900, Block Imaging lists tiers from GSP (general surgery basics) and ESP up through PMCare, Basic Vascular, Vascular MTS and Cardiac with Interventional Vascular, which add features such as digital subtraction angiography, roadmapping, cine recording and motion-tolerant subtraction. Block says secondary-market OEC 9900 units generally sell for about $70,000 to $90,000 depending on the hardware and software combination and age. (Block Imaging)

Photograph the software level screen and the enabled options. Keep the software disks: Block notes software is one of the most expensive C-arm accessories, and the disks are the backup if the software is lost or corrupted. (Block Imaging)

What about the tube, generator and other major parts?

There is no exact way to measure remaining tube life on an OEC C-arm. Block Imaging says the tube’s manufacture date is only a rough guide, and on OEC 9600 and 9800 units the hour meter records powered-up time, with no direct connection to tube use. (Block Imaging) Buyers price in the risk instead. For reference, Block lists average market prices for OEC 9900 parts of $3,000 to $4,000 for an x-ray tube, $5,000 to $7,000 for an image intensifier, $4,500 to $6,000 for a CCD camera and $2,000 to $3,000 for a high voltage cable. (Block Imaging) Note any high voltage cable damage in photos rather than letting the buyer find it.

Which records and accessories should go with it?

  • Service records. Maintenance visits and service calls. Block compares this to a vehicle history report and says a thorough history can significantly raise value. (Block Imaging)
  • Skin spacer. Find the acrylic skin spacer, which Block notes is FDA required; buyers may deduct the cost of a missing one.
  • Manuals and software disks. “Anything you don’t include, a buyer can use to talk you down in your price.”
  • Monitor cart, footswitch and cables, listed and photographed with the mainframe.

How do you show a buyer the image quality?

Buyers want to know two things: that it works, and that image quality matches the price. Block Imaging’s method: (Block Imaging)

  1. Following radiation safety protocols and wearing PPE, take an exposure into an empty field on auto with no magnification, and photograph the monitor.
  2. Repeat at magnification levels 1 and 2.
  3. Repeat with a phantom or a metal object such as a key in the field.
  4. Record a short video of the system booting without errors and capturing an image.

If the unit is in storage, power it up regularly to keep the batteries charged. Block warns: “Nothing de-values a system like a boot failure during a buyer’s inspection.”

Do you have to remove patient data from a C-arm?

Yes. HHS requires ePHI to be removed from electronic media, by clearing, purging or destroying it, before the equipment is reused or disposed of. (HHS) Block Imaging says not to simply remove the hard drive: follow the deletion procedure in the manual or have a service engineer do it, so the buyer still gets a working system. Keep the certificate. More detail is in the medical equipment data wipe guide.

What state x-ray rules apply when a C-arm is sold?

A C-arm is radiation-producing equipment registered with your state radiation control program, and most states require notice when it leaves your registration. Requirements vary. Three examples:

  • New Jersey. Registrants file a Machine Disposition Form within 30 days of a change, coded as transferred, moved, discarded, moved out of state or stored, with the recipient’s name and address for a transfer (N.J.A.C. 7:28-3.9). (NJDEP)
  • Arizona. Anyone who possesses a registered radiation machine must give written notice within 15 days of taking it out of service, including the recipient’s name and address if it is sold or transferred, and the manufacturer, model and serial number (R9-7-206). (Ariz. Admin. Code)
  • Minnesota. Service providers report changes to human-use tubes or consoles on Federal Form 2579 within 15 days, and registrants notify the state of program changes within 30 days. (Minnesota Department of Health)

On the buyer’s side, the assembler who installs a certified diagnostic x-ray system files FDA Form 2579 within 15 days of completing assembly, with copies to the purchaser and, where applicable, the state radiation agency. (FDA) Check your own state program before removal, and keep a copy of your notice in the sale file.

How should a C-arm be packed and shipped?

Block Imaging prefers vanline (air-ride) trucking for domestic C-arm shipments, with the unit wrapped, padded and strapped, and a custom crate for ocean freight. Typical crate sizes are 85″ x 41″ x 77″ at 1,067 lbs for the mainframe and 31″ x 31″ x 69″ at 530 lbs for the monitor cart. Its published costs: (Block Imaging)

  • Standard vanline, continental US: $750 to $900
  • Expedited LTL: $1,600 to $1,900
  • Ocean freight: $1,900 to $3,000
  • Crating: $350 if the crate returns (domestic), $1,500 to $1,800 if the site keeps it, plus $500 to $600 to ship a crate back
  • Liftgate truck and uncrating labor for ground-level delivery: about $500

Agree in writing who pays freight and who confirms the pickup crew and delivery address.

The C-arm selling checklist

  1. Photos of all serial tags, the software screen, tube, image intensifier or detector, and any damage
  2. Image intensifier size or flat panel, and the software options list
  3. Manufacture dates of tube, image intensifier, camera, collimator and high voltage tank
  4. Service records
  5. Skin spacer, manuals, software disks, monitor cart and footswitch
  6. Boot video and test images at each magnification, with a phantom or key
  7. Proof of ownership, and a lien release if financed
  8. Verified buyer, and the full price held by a licensed escrow provider
  9. Patient data wiped, certificate on file
  10. State x-ray disposition notice filed
  11. Freight booked with the verified carrier and address

Not sure about a buyer? Read red flags when selling to an unknown buyer. Selling a whole department? Start with the hospital closure equipment timeline.

How TradePark handles this

TradePark lists the C-arm without naming your facility, verifies the buyer, and sends the buyer one quote covering the equipment, freight and TradePark’s service fee. The buyer pays into escrow with a licensed third-party escrow provider before the unit is picked up, and funds are released after inspection. TradePark coordinates freight with licensed, insured carriers. Certified data wiping and state radiation transfer paperwork are available as paid add-ons.

List a C-arm, browse equipment for sale, or read how a deal works.

Questions

What information does a buyer need to value a used C-arm?

Make, model and date of manufacture from the serial tags, image intensifier size or flat panel detector, the software level and options, the manufacture dates of the tube, image intensifier, camera, collimator and high voltage tank, service records, and photos and video showing it boots and images without error codes.

Is a flat panel C-arm worth more than an image intensifier C-arm?

Flat panel systems cost more. Block Imaging says a new flat panel detector costs roughly two to three times an image intensifier, flat panels degrade far less over time, and service coverage on a flat panel likely costs 50% to 60% more. Image intensifiers gradually lose gain, so image quality declines with age.

Do I have to notify the state when I sell a C-arm?

In most states, yes, because a C-arm is registered x-ray equipment. New Jersey requires a disposition form within 30 days of a sale, Arizona requires written notice within 15 days of taking a registered machine out of service, and in Minnesota the service provider reports within 15 days. Check your own state program.

How do I remove patient data from a C-arm?

Follow the deletion procedure in the operator manual or have a service engineer do it. Block Imaging warns not to simply remove the hard drive. HHS requires ePHI to be removed by clearing, purging or destroying the media before equipment is reused or disposed of. Keep the certificate.

How much does it cost to ship a used C-arm?

Block Imaging lists a standard vanline shipment within the continental US at $750 to $900, expedited LTL at $1,600 to $1,900, and ocean freight at $1,900 to $3,000. Crating adds $350 to $1,800 depending on whether the crate comes back, and a liftgate truck with uncrating labor is about $500.

Sources

Start here

Selling a C-arm? Send the tags and the software screen.

We reply within one business day with a value range, a freight estimate and the paperwork your state needs.