Guide for MRI sellers

Selling a used MRI: coils and helium.

Two things decide whether a used MRI sells quickly at a fair price: whether it comes with a complete, working coil set, and whether the magnet arrives cold with its helium. Here is what to document and decide on both before you list.

Short version. Sell the coils with the system unless you have a clear reason not to, and list every coil with its part number, channel count and condition. Record the helium level from the system. Keep the magnet cold: plan a controlled ramp-down, never a quench, and agree in writing whether the magnet ships cold or warm and who pays for any helium top-up.

Do MRI coils come with a used MRI?

They should, and buyers assume they do unless the listing says otherwise. RF coils are the parts that touch the patient and receive the signal, and they are made for a specific platform, connector system and software level. A coil from one scanner family will not necessarily work on another, and a coil that works on one software release may need a different release on another system.

That is why a complete coil set from the same scanner is worth more than the same coils sold one by one. The buyer gets a system that can scan the exams it was used for on day one, without hunting for compatible parts.

When selling coils separately can make sense:

  • You are keeping a compatible scanner. Some coils may be more useful to you as spares than to a buyer as part of the package.
  • The magnet is being scrapped. If the system is not resalable, the coils may be the part with the most demand.
  • A coil is a duplicate. A second copy of a common coil can be sold on its own without hurting the system’s package.

If you pull coils out of the sale, say so plainly on the listing. A buyer who discovers missing coils after the price is agreed will either renegotiate or walk away.

How do coils affect a used MRI’s value and buyer interest?

  • Completeness widens the buyer pool. A general imaging center wants the everyday coils for head, spine, body and extremities. A missing core coil narrows the field to buyers who already own one.
  • Specialty coils attract specific buyers. Breast, cardiac, prostate, shoulder, knee or pediatric coils matter a great deal to a buyer who does that work, and little to one who does not. List them so the right buyers find the system.
  • Channel count and generation. Buyers compare coils by channel count and whether they match the system’s receiver and software. Give both.
  • Condition. Cracked housings, damaged cables, bent connector pins and worn pads all show up in photos and inspections. A coil that fails its check is a cost the buyer will subtract.

What to document for each coil

  • Coil name, part number and serial number
  • Channel count and the anatomy it covers
  • Photos of the housing, cable and connector
  • Result of the coil check from the system’s service or quality tools, if your service provider can run it before shutdown
  • Accessories that belong with it: pads, positioning aids, bases and phantoms

How much helium is in a used MRI, and why does the level matter?

A standard 1.5T scanner holds about 2,000 liters of liquid helium, according to Radiology Today and Becker’s Hospital Review. Becker’s puts lifetime use at about 10,000 liters per scanner. Some newer sealed magnet designs run on only a few liters, so the helium questions below apply mainly to conventional magnets.

The helium level is a price input. A buyer who receives a magnet with a low level has to buy a top-up before ramping up, and helium supply has been tight enough that Becker’s reported hospitals worried about MRI service during the shortage. Read the helium level from the system before listing, photograph the screen, and note the date of the last fill.

What is helium boil-off on an MRI?

Liquid helium keeps the magnet coils superconducting. Older magnets lose helium slowly as it evaporates and need regular refills. Modern magnets use a cold head, driven by a compressor, that turns escaped helium gas back into liquid and returns it to the vessel. Midwestern Career College’s MRI program calls this “zero boil-off” technology and says modern scanners “rarely need to be ‘refueled.’” (Midwestern Career College)

The catch for a sale: recondensing only works while the cold head and compressor are running. From the moment the system is disconnected for de-installation until it is reconnected at the buyer’s site, the magnet is boiling off. Transit time, delays at the loading dock and how long the magnet sits before reconnection all reduce the helium the buyer receives. Ask the service provider handling the move for the expected arrival level, and agree who pays if it arrives below that.

Ramp-down or quench: which one is used when selling an MRI?

Ramp-down is the controlled shutdown. A field engineer connects a magnet power supply and removes the current until the field is zero. The helium stays in the magnet, and the magnet can be ramped back up at the new site.

Quench is a sudden loss of superconductivity. The stored energy turns into heat and boils off the liquid helium, which vents through the quench pipe. The gas-to-liquid expansion ratio for helium is roughly 700 to 760 to 1. (MRIquestions.com) After a quench the magnet needs a refill before it can be ramped up again, and the buyer will price that in.

For a magnet being sold for reuse, specify a controlled ramp-down in the purchase agreement. The costs of ramp-down, quench refills and relocation are covered in how to sell a used MRI with escrow.

Cold vs warm MRI de-installation

  • Cold. The magnet is ramped to zero field but kept full of liquid helium, then rigged and shipped while still cryogenic. At the new site it is reconnected, topped up if needed and ramped back to field. This is the normal choice when the magnet is going straight to a buyer, and the one buyers prefer. The tradeoff is time pressure: the move has to be planned so boil-off in transit stays within what the buyer agreed to.
  • Warm. The helium is removed or allowed to boil off and the magnet warms to room temperature. A warm magnet can be stored or shipped without a boil-off clock, which helps when there is no buyer yet or the route is long. But the buyer then has to cool the magnet down from room temperature and fill it, which takes time, a large amount of helium and specialist service. Buyers generally discount a warm magnet for that reason.

Decide cold or warm before you list, because it changes who the buyers are and what they will pay. If a closure date might force a warm shutdown, start the sale early enough to avoid it. The hospital closure equipment timeline sets out when to list imaging systems.

What to agree in writing about coils and helium

  • The full coil list included in the sale, with serial numbers, and any coils excluded
  • The helium level at listing, and the minimum level the buyer will accept on arrival
  • Shutdown method: controlled ramp-down, and who pays for it
  • Cold or warm de-installation, and who pays for any top-up or cooldown
  • What the buyer is inspecting, and when the escrow inspection window starts
  • Data wipe of the console and workstations before removal (see wiping patient data with NIST SP 800-88)

On escrow, the inspection window can be set between 1 and 30 calendar days and starts once the buyer receives the equipment. (Escrow.com) A magnet that arrives at zero field cannot be imaged until it is installed and ramped up, so agree whether acceptance is based on coil checks and physical condition at arrival, or on images after installation, and size the window to match.

Want a quick view of what the system would net in different sales channels? Try the net recovery calculator.

How TradePark handles this

TradePark lists the MRI with its coil set and helium reading so buyers see what they are getting. It verifies both businesses, keeps your facility’s identity private, and sends the buyer one quote covering the system, freight and TradePark’s service fee. The buyer pays into escrow with a licensed third-party escrow provider before anything is removed. TradePark coordinates the ramp-down, de-installation, rigging and freight with licensed, insured carriers, the buyer inspects, and escrow releases the funds. TradePark never takes title, and a service fee applies only on completed transactions.

List an MRI, browse equipment for sale, or read how a deal works. Buying a scanner? Start at buy equipment.

Questions

Should MRI coils be sold with the system or separately?

Usually with the system. Coils are built for a specific platform and software level, so a complete, tested coil set from the same scanner lets a buyer start scanning without sourcing parts. Sell coils separately only when you are keeping another compatible scanner, or when the magnet itself is being scrapped and the coils are the part with resale demand.

How much helium is in a 1.5T MRI?

Radiology Today and Becker’s Hospital Review both put a standard 1.5T scanner at about 2,000 liters of liquid helium. Some newer sealed designs run on only a few liters. Record the actual helium level from the system before you list it, because buyers price from that reading.

What is the difference between a cold and a warm MRI de-installation?

In a cold de-install the magnet is ramped down to zero field but stays full of liquid helium and is shipped cold, so it can be reconnected and ramped up at the new site. In a warm de-install the helium is removed or allowed to boil off and the magnet warms to room temperature. Warm is simpler to store, but the buyer then has to pay for a full cooldown and fill, so warm magnets are usually priced lower.

Does helium boil off while an MRI is being moved?

Yes. Modern magnets use a cold head to recondense helium so they rarely need refills, but that only works while the cold head and compressor are running. Once the system is disconnected for de-installation and transport, helium boils off, so plan the route, transit time and an arrival helium check before the magnet leaves.

Is it ever acceptable to quench an MRI before a sale?

Not if the magnet is being sold for reuse. A quench rapidly boils off the liquid helium, which expands roughly 700 to 760 times as it becomes gas, so the buyer will need a refill before the magnet can be ramped back up. A controlled ramp-down removes the field and keeps the helium.

Sources

Start here

Selling an MRI? Send the coil list and helium reading.

We reply within one business day with a value range and a ramp-down, de-installation and removal plan that keeps the magnet cold.